Button Function - KEUCO iLook_move Serie Manual De Instrucciones De Uso

The product is suitable only for mounting indoors!
Caution! Only install in frost-free rooms.
Declaration of conformity! This product complies with
the requirements of the valid EU Guidelines. The dec-
laration of conformity for this product can be requested
from the following address:
KEUCO GmbH & Co. KG, Oesestraße 36,
D-58675 Hemer.
Technical data
– Power supply:
– DALI current consumption:
– max. Power consumption
17612 XX9005:
17613 XX9005:
– Protection rating:
– Ambient conditions:
Temperature:
– Light colour:
– Magnifi cation factor (mirror):
– Preset DALI group:
Mounting dimensions, see page 2.
Installation, see fi gure 1 onwards on page 17.
Connection, refer to picture 6, 8 and 9 on page 18 and 19.
L
N
DA+
DA-
Operation
The cosmetic mirror is to be integrated in the DALI
system and can be operated by an external button A
with a suitable group controller or the button on the
mirror B.
B
Important information, please make sure to read!
100-240 V AC / 50/60 Hz
2700 – 6500 Kelvin
= brown / brown
= blue / blue
= grey / orange
= black / orange
–
= black
+
= red
1
= green
2
= white
3
= brown
A
Button functions

Button Function

Light on/off
• Pressing the button switches the cosmetic mirror
• Pressing the button again switches the cosmetic
Display light colour
• Displays the set light colour.
Setting the light colour cooler
• Press and hold the daylight white button and the
• Release when the desired light colour has been
2 mA
5.5 W
Adjusting light colour - daylight white (cool white)
7.0 W
• Touch the button and the colour temperature on all
IP20
5° – 40° C
Setting the light colour warmer
• Press and hold the warm-white button and the light
x5
F (15)
• Release when the desired light colour has been
Adjusting light colour - warm white
• Touch the button and the colour temperature on all
Replacement parts with order numbers, see page 23.
For information about warranty and maintenance, see
the enclosed Maintenance and Warranty Passport.
Disposal information! Equipment with this labelling
must not be disposed of in household refuse, but
must be disposed of at a collection centre intended
for this purpose.
on.
mirror off .
light colour will transition on all lights connected
via DALI and on DALI-controllable mirrors to cold
white.
reached.
lights connected via DALI and on DALI-controllable
mirrors will be set to 6500 kelvin.
colour will transition on all lights connected via
DALI and on DALI-controllable mirrors to warm-whi-
te.
reached.
lights connected via DALI and on DALI-controllable
mirrors will be set to 2700 kelvin.
EN
5