Technical Data; Assembly; Shoulder Strap/Carrier System - Gloria Hobby 1200 Instrucciones De Uso

4

Technical data

Piston knapsack sprayer
Max. filling capacity in litres:
Permissible operating pressure:
Empty weight:
Hollow cone nozzle, spraying angle
Delivery volume at
1.5 bar spraying pressure:
2.0 bar spraying pressure:
2.5 bar spraying pressure:
Container material:
Pump material:
Mesh size of filter in
quick closure valve:
Mesh size of filling strainer:
Residual quantity after horizontal
emptying:
5

Assembly

5.1 Shoulder strap/carrier system

Figures 1 - 8
Depending on the model, your device is equipped with a padded shoulder strap or a carrying
frame.
Depending on the required operating position of the pump lever (right or left-hand side),
1
the shoulder straps can be mounted for right or left-handed persons on all model types.
The pump lever should be on the left for right-handed persons.
Type Hobby 1200/1800: Padded shoulder strap
Pass upper loop through the middle slot. Insert the mounting element into the loop. Pull
2
the strap back until it is caught in place.
Pass the two lower strap ends as shown through the metal strap buckles.
3
Type Hobby 1800: Additional lap belt
Mount the lower holding points as shown for the lap belt.
4
Pass the upper straps through the left and right slots and then pull through the strap
5
buckles as shown.
Type Pro 1300/1800: Carrier system with chest strap (model Pro 1800 includes a lap
belt)
Pass the upper middle strap through the middle slot and pull through the strap buckle as
6
shown.
Then mount the lower 4 holding points (2 outside / 2 inside) for the carrier system as
7
shown.
Pass the upper outer straps respectively through the left and right slots and then pull
8
through the strap buckles as shown.
Type Hobby 1200/1800 Type Pro 1300/1800
12/18
+ 40°C
3,45 kg / 4,30 kg
55°
0.42 l/min
0.49 l/min
0.50 l/min
Polyethylene
Polyethylene
0.9 mm
1 mm
< 150 ml
21
13/18
+ 40°C
4,00 kg / 4,90 kg
55°
0.42 l/min
0.49 l/min
0.50 l/min
Polyethylene
Brass
0.9 mm
1 mm
< 150 ml