Troubleshooting - Clevo X7200 Manual Del Usuario

Troubleshooting

Problem
The Wireless LAN/Bluetooth
modules cannot be detected.
The Bluetooth module is off after
resuming from Sleep.
The captured video files from the
PC Camera are taking up too
much disk space.
No sound can be heard through
an HDMI connected display
device.
The modules are off. Check the appropriate touch sensor indicator to see if the modules are on
or off. If the LED indicator is not illuminated, then press the appropriate touch sensor instant
key/function key combination in order to enable the modules.
The Bluetooth module's default state will be off after resuming from the Sleep power-saving
state. Use the key combination (Fn + F12) or touch sensor instant key
Bluetooth module after the computer resumes from Sleep.
Note that capturing high resolution video files requires a substantial amount of disk space for
each file. See Reducing Video File Size on page
You have not configured the HDMI audio output. See
page 15.
Concise User's Guide
Possible Cause - Solution
21.
Audio Configuration (HDMI-Out) on
to power on the
Troubleshooting - 29