Read all instructions before using or installing this product.
Symbols and their meaning
Caution! Warning of personal injury or material
damage
Caution! Warning of electric shock.
Caution! Warning of water damage.
Note, tip or reference
Correct assembly/functional test
Incorrect assembly
On/off switch
Light colour - daylight white (cool white)
Light colour warm white
Technical data
– Supply voltage:
– Max. power consumption:
Prod. No.:
- 17612 XX9052
- 17613 XX9052
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
– Magnifi cation factor (mirror):
120V AC 50Hz/60Hz
Light
3.5 W
5.3 W
NEMA 1
41° – 104 F
-40° – 158° F
2700 – 6500 Kelvin
x5
Mounting dimensions, see page 10.
Before installation check whether the fastening mate-
rials included are suitable for the anchoring base. The
fastening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
Use a 20 cubic inches electrical outlet box for rough
installation (e. g. Carlon B120R).
Installation
• Mark the wall bracket position, see fi gure 1 on
page 11.
• Mark the escutcheon position, see fi gure 2.
• Pre-drill holes, see fi gure 3.
• Mount the wall bracket to the wall, see fi gure 4.
• Insert cable into electrical outlet box, see fi gure 5 on
page 12.
• Connect cable to cosemtic mirror, see fi gure 6.
• Hang the cosmetic mirror on the wall from above,
see fi gure 7.
• Pull on cable protection, see fi gure 8.
• Screw sensor to escutcheon, see fi gure 9 on
page 13.
• Connect supply unit to sensor, see fi gure 10.
• Insert cable to sensor and unmount cable lock, see
fi gure 11.
• Connect cable to sensor and fi x cable lock, see
fi gure 12.
• Cover sensor with display, see fi gure 13 on
page 14.
• Connect supply unit to power supply, see
fi gure 14.
• Insert supply unit, see fi gure 15.
• Screw escutcheon complete to the wall and cover
with caps, see fi gure 16.
US
L
= BLACK
N
= WHITE
3