Print Setting - Gima ECG90A Manual De Uso

Function introduction
Sample settings include AC filter, EMG filter, DFT filter and demo mode.
Operating instructions
The operation is same as system setting.
Filter setting can be performed by clicking

13.5 Print Setting

The interface is shown as Fig.13-5-1 and 13-5-2.
Fig. 13-5-1
Function introduction
Print setting, prepared for print, includes print mode, auto strip, gain set,
speed set, report print set (QRS-temp, case information, parameters,
conclusion)
Operating instructions
1 Print mode
1x12, 1x12+1, 2x6, 2x6+1, 3x4, manual, store modes including.
The operating instruction of each mode is shown as following:
1x12+1, 2x6+1: rhythm lead print, rhythm lead can be set in analysis
setting.
1x12, 2x6, 3x4: automatical print
Manual: in manual mode you can print waveform according to your need
without save.
Store: in this mode case can be saved but can't be printed. The interface is
shown s Fig.13-5-3
ENGLISH
on the screen.
Fig. 13-5-2
62