Baja motorsports AT250UT Manual Del Operador página 7

4
GEAR SHIFT PATTERN
5
4
3
2
1
N
5
Improper tire pressure or
overloading can cause loss of control.
Loss of control can result
in serious injury or death.
COLD TIRE PRESSURE:
Recommended:
Minimum front: 2.5 psi (17.0 kPa)
Maximum front: 5.0 psi (34.5 kPa)
Minimum rear: 3.2 psi (22 kPa)
Maximum rear: 5.0 psi (34.5 kPa)
Never set tire pressure below the recommended
level. It could cause the tire to dislodge from the rim.
LOADING:
Maximum vehicle capacity is: 364 lbs. (165 kg)
Maximum capacity includes the weight of the operator,
cargo, and accessories.
6
CAUTION
Accessories connected to utility socket should not
•
exceed 100 watts.
Make sure accessories are firmly plugged in utility
•
socket before use.
Using utility sockets for more than 10 minutes
•
without engine running will drain battery.
7
WARNING
NEVER sit here
SAFETY LABELS
DRIVE SELECT LEVER
Read operator's manual
carefully before operating.
ATV MUST be stopped and
in first gear before shifting
the drive select lever into
or from reverse.
WARNING
LOAD LIMIT
30 kg (66 lbs.)
989000003-01
Shifting into or from reverse can only be
done in first gear.
You must come to a complete stop before
shifting into or from reverse.
989000004-01
This vehicle is an all-terrain
vehicle and is not intended for
use on public highways.
AVERTISSEMENT
Ce vehicule est un vehicule
tout-terrain qui n'est pas
destiné à etre utilise sur les
voies publiques.
989000006-01
VEHICLE INDENTIFICATION NUMBER (VIN)
AND ENGINE SERIAL NUMBER LOCATION
You need to know the VIN and engine serial numbers to get
title documents for the ATV. You also need these numbers
to order parts from your authorized service center or Baja
Motorsports.
The VIN number is stamped on the front of the ATV frame.
The engine serial number is located on the right side of the
engine housing.
Write down the serial numbers here for your future reference:
VIN:
989000007-01
Engine No:
7 — English
WARNING
WARNING
989000019-01
8
989000005-01
9
10