Power Supply; Operating Controls / Basic Settings - Riester ri-vital Instrucciones De Uso

a carrying handle
B coiler for sensor cable
c sensor holder with sensor
d tft display with illumination
e on/off button
f charge indicator
g operating buttons
h predictive thermometer extension module (optional)
i probe cover box (optional)
J infrared thermometer extension module (optional)
k mains adapter connector
l charge indicator

5. poWer supply

the device can be mains operated or off line with the built-in Li-ion battery. For mains
operation, the mains adapter must be connected to a power outlet and be inserted into
the left side of the device (K) using the cable. then the battery is also charged. the
yellow charge indicator (F) on the front of the device is illuminated while the device is
being charged. If it is not illuminated, the battery is fully charged. For the measurement,
the device must additionally be turned on on the front of the device using button (e). If
no spO2 measurement is taken and no blood pressure measurement is started either,
then the entire device turns itself off in about 10 minutes. this prevents accidental
depletion of the battery.
In battery operation, the device shows the remaining charge with a symbol (L) in
the lower part of the display. this display has a large tolerance because various
parameters, such as ambient temperature, also affect the battery.
ri-vital
®
POwer suPPLY
50
p
k
n
left side view
m infrared sensors
n spo2 sensor connector
k mains adapter connector
o niBp cuff tube connector
p niBp cuff storage place

6.operating controls / Basic settings

6.1 Basic settings menu
after pressing the On/Off button the riester logo appears on the screen,the Print
button must be pressed within 5 seconds to arrive in the Basic settings menu.
set language
set time
set date
delete memory
leakage test
Only for technical service personnel!
manometer mode
Only for technical service personnel!
temperature unit
time format
ri-vital
®
OPeratInG cOntrOLs / BasIc settInGs
m
right side view
51