Tabla De Contenido; Product Description; Product Overview; Introduction - Husqvarna 226K Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Introduction..................................................................... 2
Safety..............................................................................3
Assembly........................................................................ 8
Operation........................................................................ 9

Product description

This product is a power unit.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.

Product overview

14
15
1. Shaft
2. Front handle
3. Harness support hook
4. Stop switch
5. Throttle trigger lockout
6. Throttle trigger
7. Spark plug cap and spark plug
8. Cylinder cover
9. Starter rope handle
10. Choke control
11. Air filter cover
12. Fuel tank
13. Air purge bulb
14. Combination wrench
15. Locking pin
16. Hex key
17. Operator's manual
2
Contents

Introduction

16
17
Maintenance................................................................. 11
Troubleshooting............................................................ 14
Transportation and storage...........................................15
Technical data.............................................................. 16

Intended use

Use the product with a harvest attachment for coffee
harvest. Do not use the product for other tasks.
Note: National regulations can set limit to the operation
of the product. Comply to given regulations.

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection and approved eye
protection.
Maximum speed of the output shaft.
1261 - 001 - 19.09.2019

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido