Setting The Temperature; Automatic Shut-Off; Cleaning And Maintenance; Troubleshooting Guide - Beurer HK 47 Instrucciones De Uso

Setting the temperature

Setting 1: Minimum heat (LED display of the On/Off button lights up green)
Setting 2: Medium heat (LED display of the On/Off button lights up yellow)
Setting 3: Maximum heat (LED display of the On/Off button lights up red)
OFF: On/Off button not lit

Automatic shut-off

This heating seat is equipped with an automatic shut-off function that shuts the heating seat off after
about 110 minutes. The Power Button of the heating seat and the white LED on the Power Bank will shut
off. Press the Power Button to switch the heating seat back on. If the heating seat does not switch on, the
Power Bank is depleted and must be recharged.

6. Cleaning and Maintenance

WARNING
• Prior to cleaning, always disconnect the Power Bank from the heating seat and remove it from the
heating seat's pocket.
• Always keep the Power Bank away from water or other liquids, as this may cause damage. To clean
the Power Bank, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
NOTICE: To prevent product damage, do not dry clean, wring out, tumble dry, or iron the heating seat.To
machine wash, close the hook-and-loop fastener of the heating seat and place it in a pillow case.
Set the washing machine to the delicate or wool cycle and the warm water setting. Always wash
the heating seat together with other items. Use a mild laundry detergent according to the manu-
facturer's instructions.
Frequent washing of the heating seat is not recommended and should only be machine washed
a maximum of 10 times during its life. Let the heating seat dry flat on a drying rack. To prevent
product damage, do not use pegs or similar items to attach the heating seat to the drying rack.
NOTICE: Reconnect the heating seat to the Power Bank only after the heating seat and the connector plug
are completely dry.
Storage
A storage bag is provided for taking the heating seat with you on journeys. Remove the Power Bank. Care-
fully roll up the heating seat and then also place the Power Bank in the storage bag.
If you do not plan to use the heating seat for a long period of time, store it in the original packaging in a cool,
dry place. Always remove the Power Bank before storing the device.
The Power Bank should be charged at least once per year to maintain its capacity.
NOTICE: Allow the heating seat to cool down before storing. Do not fold the heating seat. To avoid making
sharp bends in the heating seat, do not place any objects on top of it while storing.

7. Troubleshooting Guide

Problem
The Power Button nor Power Bank
LED light up when:
- the Power Bank is connected to
the heating seat and
- the Power Button is pressed.
Cause
The Power Bank has been
depleted.
The Safety shut-off sensor was
triggered because of overheating.
6
Solution
Charge the Power Bank.
Allow the heating seat to cool
down to room temperature
and switch on again.