Cleaning, Changing The Infrared Lamp And Storage; Important - Beurer IL 50 Instrucciones Para El Uso

Preparing for treatment
• Arrange yourself in front of the unit so you can relax
and enjoy the treatment of the part of the body con-
cerned.
• Tilt the lamp so the unit is angled directly at the part
of the body being treated.
• The distance to the infrared radiant heater depends
largely on personal heat sensitivity and the treatment
concerned.
• Make sure the distance between the infrared radi-
ant heater and the part of the body being treated
is not less than 30 cm!
Do not use the unit for more than 15 minutes at a time
(risk of overheating). Allow the unit to cool down before
you use it again.
Treatment duration

Important

• Risk of burns: Remove any metal items, e.g. belt
buckles, necklaces, bras, jewellery or piercings, from
the treatment area before switching on the device as
they can become very hot.
We recommend short treatment times at the beginning.
However, even when the unit is used correctly, the skin
of some people can have an oversensitive or allergic
reaction to the heat treatment (e.g. intense redness,
blisters, itching, heavy sweating).
Starting the unit
Important
• Always close or cover your eyes when radiating the
face.
• Press the On/Off switch (3)
• The unit will turn on automatically after a short time.
• Set the time selector (5) to the desired duration (1 to
15 minutes).
• You can press the time selector (5) during operation
to reset the treatment duration.
• The infrared radiant heater switches off automatically
after the set time.
• For an additional treatment, you only need to press
the time selector (5) to reset your individual treatment
time.
Important
• Do not touch the hot glass.
• To end treatment, use the On/Off switch (3) and dis-
connect the power plug.
During treatment
• Examine the part of the body treated frequently and
check for skin reactions. Cease exposure immedi-
All manuals and user guides at all-guides.com
• The unit can be switched off at any time using the
• Do not cover up or pack the unit away while it is
After treatment
• Switch off the unit at the On/Off switch (3).
• Pull the mains plug out of the socket.
6. Cleaning, changing the infrared
Cleaning
Before cleaning the unit, switch it off, unplug it and
allow it to cool down completely.
• Ensure that no water enters the unit!
• Do not wash the unit in a dishwasher!
The unit can be cleaned with a damp cloth. Do not use
cleaning agents.
Changing the infrared lamp
Remember that a faulty lamp should only be replaced
with a lamp of the same type.
Replacement lamp
Type: Halogen lamp 220 - 240V / 300 W
118 mm long for R7S socket
Original Order no. 162.620
Danger of an electric shock!
• Before changing the lamp, make sure the power ca-
• Risk of burning on hot surfaces!
• Allow the unit to cool completely before any repairs.
• Lamps are not covered by the guarantee.
11
ately if there are any signs of oversensitivity or an
allergic reaction, and consult a doctor.
On/Off switch (3).
warm.
lamp and storage
Important
Important
Warning
ble is unplugged from the socket.