IARP B-ICE N Manual De Instrucciones De Empleo Y Manutención página 21

TEMPERATURE SETTING AND CONTROLS
B-ICE
2
OFF
1
STOP
3
5 4 ON
5 3
Each refrigerating appliance is provided with two thermostats for automatic maintenance of the
temperature inside the tanks: one (6) for upper tank, the second (5) for lower tank.
Theese temperature adjusters are gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
MINI B-ICE
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tanks.
This temperature adjuster is gauged by the factory and should not be touched by the user. Only if the
average internal temperature is too cold or not cold enough should the knob (3) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
OFF
ON
1
1) Lower tanks group main switch
2) Upper tank group main switch
3) Lower tanks group Light switch
4) Upper tank group Light switch
5) Lower tanks group main thermostat
6) Upper tank group main thermostat
1) Main switch
2) Tanks light switch
3) Thermostat
OFF
ON
1 2
-21-
OFF
ON
2 4
4
5
OFF
3
STOP
ON
2
1
3
4
OFF 5
3
STOP
ON
2 1
6