Multifunction Button - Focal ARCHE Manual De Uso

ARCHE
™
U s e r m a n u a l
10
10: XLR HEADPHONE OUTPUT
This headphone output allows you to connect
a set of headphones via a 4-pin stereo XLR
connector, generally used with balanced audio
cables.
We recommend using this output to achieve the
best possible performance.
We recommend connecting a single set of head-
phones to Arche to ensure the best performance.
11: JACK HEADPHONE OUTPUT
This headphone output allows you to connect a
set of headphones via a ¼" (6.35mm) stereo jack,
generally used with unbalanced audio cables.
We recommend connecting a single set of head-
phones to Arche to ensure the best performance.
11 12
12 : SCREEN
You can use the screen to check Arche's operation.
13: LED
The LED indicates the status of Arche. When it
is not illuminated, this means that Arche is in the
OFF position or is not connected to the mains.
It is also not illuminated when it is working. Red
means that Arche is powered in stand-by mode. If
the LED is flashing red, this means that the device
is starting up.

14: MULTIFUNCTION BUTTON

You can use the multifunction button to navigate
through Arche's various menus and settings.
Standby: press and hold the multifunction to
place Arche on stand-by. Once ARCHE is in stand-
by mode, press the button to reactivate it.
13 14
24