After Using; Replacing The Power Cable - EINHELL TC-AC 190 OF Manual De Instrucciones Original

6.3 Compressed air hose with quick-lock
coupling (3)
Connecting:
Insert the nipple of the air tool into the quick-lock
coupling, the sleeve will spring forward automa-
tically.
Disconnecting:
Pull back the sleeve and remove the tool. Cauti-
on! When releasing the quick-lock coupling, be
sure to hold the coupling piece to protect yourself
against injury from the rebounding hose.
6.4 Tire pressure gauge with adapters (Fig. 2)
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to infl ate tires
easily and exactly. Use the pressure gauge to
check the tire pressure. If the tire pressure is too
high, you can reduce the pressure with the integ-
rated relief valve (e).
After fi lling with air, please check the set tire
pressure with a calibrated gauge, for example at a
petrol station.
The tire pressure gauge comes with a valve adap-
ter for car tire valves.
Other valve types can be fi lled using the supplied
adapters.
Using the equipment as a blow-out pistol
(Fig. 3)
To use the tire pressure gauge as a blow-out
pistol you must fi rst unscrew and remove the
hose with the valve adapter for care tires. Now the
blow-out adapter (7) can be screwed to the tire
pressure gauge.
Range of applications:
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning soiled
equipment. The infi nitely variable trigger lever al-
lows an exact dosing of compressed air.
Do not exceed the maximum permissible opera-
ting pressure of 8 bar (also shown on the back of
the tire pressure gauge).
Anl_TC_AC_190_OF_Set_SPK9.indb 21 Anl_TC_AC_190_OF_Set_SPK9.indb 21
GB
6.5 Instructions for the adapter set
For information on the correct use of the adapters
for the various valves, please refer to the following
overview (see Fig. 7 which shows how to connect
the adapter to the compressor).
•
Ball needle (Fig. 4)
Area of application: For infl ating balls. The
ball needle can be used to infl ate a variety of
diff erent balls.
TIP: To avoid damaging the valve, moisten
the needle slightly before inserting it.
•
Valve adapter (Fig. 5)
Area of application: For Dunlop and Presta
cycle tire valves.
This valve adapter is designed for infl ating
cycle tires.
•
Conical universal adapter (Fig. 6)
Area of application: The universal adapter can
be used for infl ating airbeds and other similar
items.
Danger! Never direct the jet of compressed air at
yourself or at any other persons or animals.
Caution! Infl ating objects to above the recom-
mended pressure level may cause damage to the
objects or harm to bystanders!
6.6 What to do in case of an abnormal/emer-
gency situation
1. Stop the operation
2. Switch off the equipment.
3. Pull the power plug

6.7 After using

1. Switch off the equipment.
2. Pull the power plug
3. Remove all accessories from the equipment
such as, e.g. hose, tire pressure gauge, etc.
4. If the equipment is going to be cleaned or
repaired, allow it to cool down fi rst.
5. Check the equipment for signs of damage.

7. Replacing the power cable

Danger!
If the power cable for this equipment is damaged,
it must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
- 21 -
04.12.2019 13:50:52 04.12.2019 13:50:52