Miele STB 101 TURBO MINI Instrucciones De Manejo página 9

Before using the mini turbobrush it is
essential to read and observe the
Warning and Safety instructions in
the Operating instructions for your
vacuum cleaner.
Recommended use
(see illustration on page 2)
The mini turbobrush is intended for
vacuuming upholstery, mattresses, car
seats, carpeted stairs etc.
The rotating roller brush is ideal for
removing hair and fluff.
It is important to observe the flooring
manufacturer's cleaning and care
instructions.
Using the mini turbobrush
^ Attach the mini turbobrush to the
hand-piece or the suction tube, as
required.
^ To achieve the best results, pass the
mini turbobrush slowly backwards
and forwards over the surface you
are cleaning.
Maintenance and care of the
mini turbobrush
,
Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and
withdraw the plug.
Removing threads and hairs
(see illustration on page 2)
^ Cut any threads or hairs that have
become entangled in the roller with a
pair of scissors. Then run the vacuum
cleaner to vacuum up the bits.
For more obstinate tangles or
blockages inside the mini turbobrush,
the cover can be opened. Any large
particles inside it can then be easily
removed.
^ Turn the grip so that the release
button is in the middle of the guide
(illustration a).
^ Press the release button (illustation
b) and pull the grip out from the mini
turbobrush as far as possible
(illustration c).
^ Lift the upper part of the casing as far
as it will go and remove any debris
from the inside of the casing and
from the roller brush.
^ Close the casing, and push the grip
back into position until it clicks into
place over the release button.
en
9