Fusion Apollo MS-RA770 Guia De Inicio Rapido página 5

When pairing, your compatible Bluetooth device may ask you to confirm a
code on the stereo. The stereo does not display a code, but it does connect
correctly when you confirm the message on the Bluetooth device.
8
If your compatible Bluetooth device does not immediately connect to the
stereo, repeat steps 1 through 7.
The DISCOVERABLE setting is disabled automatically after two minutes.
NOTE: On some Bluetooth devices, adjusting the volume on the device affects
the volume level on the stereo.
Bluetooth Range Information
The stereo and Bluetooth wireless devices have a range of 10 m (33 ft.). For
optimal performance, the Bluetooth wireless device should also have a clear line
of sight to the stereo.
Connecting to a Garmin ® Watch
For more information about the watch, see the watch manual at www.garmin.com
/manuals.
1
Following the instructions in the watch manual, install the FUSION-Link Lite
app from the Connect IQ ™ store onto the watch.
2 On the stereo, select the BT source.
3 Select > DISCOVERABLE.
The stereo remains discoverable for two minutes.
4
Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
5
Open the FUSION-Link Lite app on the watch.
The first time you open the app on the watch, the watch automatically pairs
with and connects to the stereo. If you need to pair to another stereo, in the
FUSION-Link Lite app, select Settings > Pair new.
6
Control the audio playback using the FUSION-Link Lite app on the watch.
After the devices are paired, they connect automatically when they are turned on,
within range, and the app is open on the watch.
Quick Start Manual
Connecting an Apple Device Using AirPlay
1
From the settings menu on your Apple device, connect to the same wireless
network as your compatible FUSION
NOTE: You can connect some Apple devices to the network using a wired
Ethernet connection, if applicable. Go to the Apple website for more
information.
2
On your Apple device, open the music app you want to stream to the stereo.
3
From the music app or program, select
stereo.
4 If necessary, start playing music on the app.
The stereo changes to the AirPlay source automatically and plays audio from
your Apple device.
NOTE: If your Apple device is using AirPlay 2 software, you can connect to
multiple stereos on the same network.
NOTE: If your Apple device is using the original AirPlay software, you cannot
™
stream the AirPlay source to other stereos on the network using the FUSION
PartyBus
NOTE: On some AirPlay devices, adjusting the volume on the device affects
the volume level on the stereo.
Configuring a Wireless Access Point for Apple AirPlay
For the best results when using Apple AirPlay, you should set up this stereo as a
wireless access point and connect to it using your compatible Apple device.
devices while pairing.
®
NOTE: By default, Wi‑Fi
1
From the stereo screen, select
POINT.
2
Write down the SSID and PASSWORD.
3
Select SAVE.
4
Connect your Apple device to the stereo wireless access point using the
SSID and PASSWORD.
® stereo.
or
™ network.
® is off on the stereo.
> > NETWORK > WI-FI ACCESS
, and select the name of the
5