DeLonghi DD1000TC Serie Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING YOUR COFFEE MAKER
11. Press the ON/OFF button once to stop brewing during the brewing cycle.
12. The machine will automatically shut-off when the brewing cycle has finished.
An audible alarm will indicate when the brewing cycle has finished.
13. NOTE: If you would like a cup of coffee before the full pot is brewed, the Pause
'N Serve feature allows you to interrupt the brewing process. The brewing
process does not stop during this period; only the flow of coffee from the
basket. Do not remove the carafe for longer than 30 seconds or the coffee
may overflow from the basket stops. While we offer this feature, we do not
recommend you pour the coffee before the cycle has reached completion,
since the coffee brewed at the beginning of the cycle has a flavor which is
very different from the flavor at the end of the cycle. Removing a cup during
the brewing cycle will alter the flavor of the finished pot.
14. The thermal carafes will keep coffee hot after brewing is complete.
15. NOTE: Never operate your coffee maker without the carafe lids in place on the
carafes. Doing so will cause your coffee maker to overflow.
DECALCIFICATION INDICATOR
1.
After approximately 90 brew cycles the coffee maker will automatically indicate
when it needs to be cleaned. The ON/OFF and TIMER lights will blink at the
same time indicating that it is time to manually clean the machine.
2.
To decalcify the machine follow directions 9 and 10 under the "Cleaning Your
Coffee Maker" section of this manual.
3.
To reset the machine for both sides, press the ON/OFF and PROG buttons at
the same time for 2 seconds.
(continued)
-11-

Publicidad

Tabla de contenido
loading

Tabla de contenido