Operation; Maintenance And Cleaning - Abicor Binzel MF Control Manual De Instrucciones

MF Control

7 Operation

Carry out each step in accordance with the figure below:
Fig. 4 Operation
The operating system boots and the MFS service software starts automatically. Following correct configuration of the MFS
service software, a connection with the eBOX can be established.
For more precise details about the configuration of the MFS service software, refer to the corresponding operating manual.
8 Decommissioning
1 Close the service software and shut down the Windows operating system correctly.
NOTICE
• If the eBOX is switched off while the MF Control is actively running, power to the MF Control will be immediately
cut and it will not be shut down correctly. Data may be lost!

9 Maintenance and cleaning

Under normal operating conditions, the MF Control does not require maintenance. Scheduled maintenance and cleaning
are prerequisites for a long service life and trouble-free operation. Clean the screen with a screen cleaning cloth designed
for use on LCD displays.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• The specified maintenance intervals are standard values and refer to single-shift operation.
• Maintenance and cleaning work may be carried out only by qualified personnel (in Germany see TRBS 1203).
BAL.0532.0 • 2018-08-16
7 Operation
EN - 9