Signs And Symbols Used; Scope Of Delivery; Transport - Abicor Binzel MF Control Manual De Instrucciones

4 Scope of delivery

3.4 Signs and symbols used

In these operating instructions, the following signs and symbols are used:
Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1
Step(s) described in the text to be carried out in succession
Action(s) described in the figure to be carried out in the indicated order
A
Tab. 4 Signs and symbols
4 Scope of delivery
• MF Control
• MFS service software V6.0 or above (pre-installed)
Tab. 5 Scope of delivery
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current product catalog. Contact
details for support and placing orders can be found online at www.binzel-abicor.com.

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of damage during
transport.
Goods-in inspection
In case of complaints If the delivery has been damaged during transport, contact the last carrier immediately.
Packaging for
returns
Tab. 6 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-5
EN - 6
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
Retain the packaging for potential inspection by the carrier.
Where possible, use the original packaging and the original packaging material. If you have
any questions concerning the packaging and/or how to secure an item during shipment,
please consult your supplier.
• Operating instructions
BAL.0532.0 • 2018-08-16
MF Control