MANUAL MASSAGE
Kneading rolling massage
1. Press the "knead"
The massage heads start the kneading rolling massage.
2. To raise the massage heads, press the "up"
• All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the "stroke" adjustment button.
3. To adjust the intensity of massage, press the "intensity"
NOTE:
When using a two function massage on manual mode, you can eliminate one function by pressing on that
function's control button. Thus, it is okay to change from kneading/rolling to just kneading by hitting the rolling
button or to just rolling by hitting the kneading button once to toggle it off.
Tapping rolling massage
1. Press the "tap"
The massage heads move to the narrowest position and start the tapping rolling massage.
2. Press the "width" adjustment button to select the width of the massage heads (narrow or wide).
3. To raise the massage heads, press the "up"
• All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the "stroke" adjustment button.
4. To adjust the intensity of massage, press the "intensity"
NOTE:
When using a two function massage on manual mode, you can eliminate one function by pressing on that
function's control button. Thus, it is okay to change from tapping/rolling to just tapping by hitting the rolling
button or to just rolling by hitting the tapping button once to toggle it off.
Adjustability
Manual Mode
: possible,
: not possible
14
button and the "roll"
button and the "roll"
Adjustability for Manual Massage
Up/Down
Adjustment
Adjustment
23 5/8"
(600 mm)
23 5/8"
(600 mm)
23 5/8"
(600 mm)
23 5/8"
(600 mm)
23 5/8"
(600 mm)
button.
button. To lower them, press the "down"
buttons.
button.
button. To lower them, press the "down"
buttons.
Intensity
Width Adjustment
1 3/4"
(45 mm)
1 3/4"
3 5/16" or 4 5/16"
(45 mm)
(85 or 110 mm)
5/8"
3 5/16" or 4 5/16"
(15 mm)
(85 or 110 mm)
5/8"
(15 mm)
5/8"
3 5/16" or 4 5/16"
(15 mm)
(85 or 110 mm)
button.
button.
Stroke Adjustment
4 3/4" or 23 5/8"
(120 or 600 mm)
4 3/4" or 23 5/8"
(120 or 600 mm)
4 3/4" or 23 5/8"
(120 or 600 mm)