Samsung POWERbot SR1AM70 Serie Manual De Usuario página 11

Accessories
or
Remote control
(Optional)
Docking station
✻ ✻ Accessories may differ depending on the models.
✻ ✻ Refer to page 17 for the installation of boundary markers.
Installation note
Note
f Install the docking station in a place where the floor is level and the wall is straight.
f It is best to install the docking station along the grain of wooden floors.
f If the emergency switch is off, the POWERbot will not charge even if it is docked in the
docking station.
f Always turn on the power of the docking station.
– If power is not supplied to the docking station, the POWERbot cannot find it and cannot
automatically recharge.
– If the POWERbot is left detached from the docking station, the battery will drain.
f If the POWERbot is in sleep mode, power will not come on even if the emergency switch is
turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn the
sleep mode off.
1_VR7000_EN_DJ68-00763C-10_USA.indd 11
Batteries (AAA type)
(Optional)
Power cord
ENGLISH-11
User manual Spare filter (Optional)
Battery charger Boundary markers
(Optional)
2017-12-01 오후 4:46:08