Water Connections - BONAIRE Durango Serie Manual Del Propietário

I I
NSTALLATION NSTRUCTIONS
Unit Installation

3.3 Water connections

3.3.1 Connect the Float valve to the water supply. Note the float valve and connections
have been factory fitted requiring only water supply hose to be fitted to the external
connection fitting at the corner of the tank /base as shown in the image below.
Ensure all water connections are securely fastened to prevent leaks.
3.3.2 Installation of the bleed off hose is required to prevent mineral deposits in the
system. Adjust the bleed restrictor bracket to allow control of the bleed rate to suit
local supply water conditions. Adjust the bleed off to approximately 2 ½ gallons /
hour and adjust as necessary.
Slide hose this way
to reduce flow
Tank / base
11
Float valve
assembly
Slide hose this way
to increase flow
External
connection