Introduction - Kanto AVS SERIE Manual Del Usuario

AVS1/ AVS2/ AVS3
WALL MOUNT SHELVING SYSTEM
Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . 4
Setup - Step 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setup - Step 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Introduction
Thank you for choosing a Kanto Living Wall Mount Shelving System . The installation instructions for the AVS1, AVS2 and
AVS3 are virtually identical, and you can break down your AVS2 or AVS3 into multiple shelving units, if preferred . The
shelves can be installed to a wood stud, into concrete, or into drywall . Maximum weights are indicated on the cover, and
the height of the shelves is easily adjustable during installation .
Read these instructions fully before installation of this mount . If you do not understand these directions, or have any
doubts about the safety of the installation, please consult a qualified installation contractor to install this mount .
Make sure there are no defective or missing parts . Do not use defective parts . If there is hardware missing, or if you
are uncertain whether the part is defective call Kanto directly at 1-888-848-2643 or support@kantoliving .com . Kanto
cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect
use of this product .
This product should not be mounted on steel stud walls or cinder block walls . Consult a qualified installation con-
tractor if you are unsure about the type of wall you may have .
Visit our Website for the most recent version of this manual
CAUTION
The maximum loading weight for AVS1 is 30 lbs (14 kg), for AVS2 is 45 lbs (20 kg), and for AVS3 is 60 lbs (27
kg) . This shelving system is intended for use only within the maximum weight restrictions indicated . Use with products
heavier than the maximum weights indicated may result in instability causing possible injury .
CAUTION
The wall you plan to affix the Kanto shelving system to must be able to support more than 5 times the weight
of the shelves and AV components combined . Improper installation may cause damage to your AV components or
serious injury . This product should not be mounted to steel stud walls, cinder block or old concrete walls . Consult a
qualified installation contractor if you are unsure about the type of wall you may have .
See installation video online at:
www.kantoliving.com
Setup - Steps 3 to 4 . . . . . . . . . . . . . . . . . . . . . . . 7
Setup - Step 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
English
3