Sedus talk about Instrucciones De Montaje página 11

2. Tables with folding individual legs
Assembly
Place the table upside down on
1.
the floor, ensuring that the table
top is not scratched on the floor
in the process (A)
Release one table leg from
2.
the lock by pushing towards
the joint (B)
Fold up the table leg (C)
3.
Push the table leg into the
4.
corner element and keep it
pressed down whilst screwing
tight in a clockwise direction (D)
Repeat these steps to assemble
5.
the remaining legs
Turn the table upright and check
6.
that it is stable
The height-adjustable glides
7.
can be used to compensate for
uneven flooring
Dismantling
Place the table upside down on
1.
the floor, ensuring that the table
top is not scratched on the floor
in the process
Unscrew the table leg in an
2.
anticlockwise direction until
the spring force of the joint is
released (A/B)
Fold down the table leg* (C)
3.
Push the leg towards the joint
4.
and lock it into place (D)
Repeat these steps to fold up
5.
the remaining table legs
* The glides of tables with an edge
length of 700 mm should be com-
pletely screwed in otherwise the
leg cannot be locked into place.
A
C
A
C
B
D
B
D
11