Filling The Tank; Technical Description - Reliable J490A Manual De Instrucciones

FILLING THE TANK

Equipped with CSS™ (Continuous Steam System) your steam iron system can
be filled anytime during the ironing operation.
MAINTENANCE OF THE BOILER
To maintain your steam ironing system in good condition and to ensure constant
performance, we recommend that you periodically clean the boiler once or twice
a year depending on the hardness of the water:
CLEANING INSTRUCTIONS
ATTENTION: Before cleaning the boiler with the supplied de-scaling powder, please
make sure that the boiler is at room temperature, that it has not been used for at
least 8 hours, and that the boiler is disconnected from the power source.
1. Unscrew and remove the filling cap (6) that is in the middle of the ironing rest
pad (7) with the tool provided, turn the boiler over and eliminate all water
remaining in the boiler.
2. Dissolve completely the contents of the single package of de-scaling powder
in 2 cups (0.65L) of water.
3. Pour the solution into the boiler (Attention: Do not put the dissolved solution
into the water container).
4. Leave the solution in the boiler for one night with the filling cap off.
5. Completely empty the contents of the boiler and rinse three or four times
with water in order to eliminate possible residues of scale.
6. It is a good idea to spray the first steam onto a cloth and not directly on any
surface since there still may be scale in the system.
ATTENTION: IT IS NOT RECOMMENDED THAT YOU USE ANY OTHER CHEMICAL TO CLEAN
THIS PRODUCT. DOING SO WILL AUTOMATICALLY VOID THE WARRANTY.

TECHNICAL DESCRIPTION

120V Power
Cold water tank capacity
Working pressure
Safety valve
09
1750W
0.65L
4bar
Yes