Tristar SM-6000 Manual De Usuario página 18

C
A
B
D
E
Lower thread
When inserting or removing the lower bobbin, the needle must be fully raised.
Turn the hand wheel (no.11). Pull out the plastic transparent cover (no. 9).
Insert the bobbin in the bobbin case, so that the thread rund in a clockwise direction.
Replace the transparent cover (no. 9)
Raise the presser foot, hold the upper thread with the left hand, right hand turn the handwheel
anticlockwise until the needle is raised. When the needle reach the bottom, the hook tray will
hook the upper thread, rotate the hook tray to pull the lower thread out. Pull the lower and
upper thread under presser foot(no.8), pull out 10 cm to the back.
No.11
No.14
17