Trotec BE40 Manual De Instrucciones página 16

• Electric shock from insufficient insulation. Do not use
the device when the device or your hands are damp
or wet!
• Electric shock from insufficient insulation. Do not use
the device when the battery compartment or the hou-
sing are open!
Caution!
• Make certain that the correct measuring range is se-
lected before making measurements. If you are un-
sure, select the largest measuring range to avoid
damages to the device!
• Unplug the measuring cable before changing the
measuring range. Otherwise, the electronics of the
device can be damaged.
• Do not use abrasive cleaners or solvents to clean the
device!
B - 3
• The device must not be exposed to direct sunlight,
high temperatures or humidity! Otherwise, the insu-
lation or electronics of the device can be damaged.
• Do not leave the packaging lying around. Children
may use it as a dangerous toy.
• Measuring devices are not toys and do not belong in
the hands of children!
Personnel qualifications
People who use this device must:
• know and understand the dangers of working on live
parts.
• take measures to protect themselves from direct
contact with live parts.
• have read and understood the operating manual,
especially the Safety chapter.
Operating Manual – Clamp Meter BE40
EN