Power Button; Control Panel And Features - Sears Kenmore 110.2813 410 Serie Manual De Uso

Lavadora de alto rendimiento y carga superior, con nivel bajo de agua
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEAM MODEL
NON-STEAM MODEL
NOTE:
desired section is illuminated.

POWER BUTTON

1
Touch to turn the washer ON. Touch to stop/cancel a cycle at
any time.
WASH CYCLE KNOB
2
Turn the Wash Cycle knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIME DISPLAY
3
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load
display. Overloading, unbalanced loads, or excessive suds
may cause the washer to adjust the cycle time, as well.
DELAY WASH
4
Use "+" and "–" to delay the start of the wash cycle by up
the delay time to "0," or touch POWER.
START/PAUSE/UNLOCK LID BUTTON
5
Touch and hold START/PAUSE button for up to 3 seconds
or until the washer starts to begin the selected cycle; touch
again to pause a cycle.
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid.
4

CONTROL PANEL AND FEATURES

1
2
1
2
Not all features and cycles are available on all models.
3
4
5
3
4
5
CYCLE MODIFIERS
6
When you select a cycle, its default settings will light up.
WASH TEMP
Wash Temp control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric.
be cooler than what your previous washer.
be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Select the most suitable setting for your load. For heavily
soiled items, select Ex Heavy Soil Level for more wash
time. For lightly soiled items, select Light Soil Level for
less wash time.
Lighter soil level setting will help reduce tangling and
wrinkling.
SPIN SPEED
This washer automatically selects the spin speed based
on the cycle selected. The preset speeds can be changed.
Not all spin speeds are available with all cycles.
increase wrinkling in your load.
your load more damp.
6
7
8
6
7
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Kenmore 110.2913 410 serie

Tabla de contenido