Makita HR4040C Manual De Instrucciones página 10

CAUTION:
• Be careful not to damage the connector or lead wires
especially when wiping out the old grease or installing
the handle.
• Do not tighten the crank cap excessively. It is made of
resin and is subject to breakage.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a Makita
Authorized Service Center.
10
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Screw bits
• Taper shank adapter (More taper #1)
• Cotter (Drift key)
• Core bit adapter
• Rod
• Ground rod adapter
• Chemical anchor adapter
• Cold chisel
• Bull point
• Scaling chisel
• Grooving chisel
• Clay spade
• Bushing tool
• Rammer
• Blow-out bulb
• Safety goggles
• Depth gauge
• Side grip
• Bit grease (100 g)
• Hammer grease (30 g)
• Plastic carrying case
• Side handle