2. Lift open the vented door.
3. Snap the filter into place.
Air Filter Status Indicator
The control panel displays the Air Filter status.
GOOD - The air filter icon on the control lights up in BLUE.
ORDER a replacement - The air filter icon on the control lights
up in YELLOW.
REPLACE air filter - The air filter icon on the control lights up in
RED and "Replace Filter" will appear.
EXPIRED - The air filter icon lights up in RED and "Replace
Filter" flashes on the control display.
After replacing the air filter, press and hold the AIR FILTER button
for 3 seconds. The filter icons will turn off. See "Using the Controls."
When the system is reset, the air filter icon will return to its BLUE
color and the words "Replace Filter" will disappear from the
display.
NOTE: At any filter status, pressing and holding the AIR FILTER
button for 3 seconds will reset the air filter status to Good and the
air filter icon will turn off.
Replacing the Air Filter
The disposable air filter should be replaced every 6 months, or
when the status indicator air filter icon turns on and starts flashing
when the refrigerator door is opened.
To order a replacement air filter, contact us.
1. Remove the used air filter by squeezing in on the side tabs.
2. Install the new air filter and reset the status indicator using the
instructions in the previous section.
Install CrisperKeeper™ Produce Preserver
(on some models)
The accessory packet includes 2 produce preserver pouches, which
should be installed in a crisper drawer prior to use.
NOTE: For best performance, always use two pouches.
The produce preserver absorbs ethylene, to slow the ripening
process of many produce items. As a result, certain produce items
will stay fresh longer.
Ethylene production and sensitivity varies depending on the type of
fruit or vegetable. To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits that produce
moderate to high amounts of ethylene.
Very
Low
Sensitivity
to Ethylene
High
Broccoli
Lettuce
Spinach
Med.
Asparagus
Citrus fruit
Low
Carrots
Grapes
Produces Ethylene
Low
High
Very
High
Apples
Pears
Cantaloupe
Berries
Installing the Produce Preserver
CAUTION: IRRITANT
MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES
FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with cleaning products containing ammonia,
bleach or acids. Do not get in eyes, on skin or clothing. Do
not breathe dust. Keep out of reach of children.
FIRST AID TREATMENT: Contains potassium
permanganate. If swallowed, call a Poison Control Center or
doctor immediately. Do not induce vomiting. If in eyes, rinse
with water for 15 minutes. If on skin, rinse with water.
The produce preserver pouches should be installed in the housing,
located on the wall of one of the crisper drawers.
1. Remove the CrisperKeeper™ Produce Preserver pouches from
the packaging.
2. Lift up on the housing to remove it from the mounting tab.
3. Open the housing by pulling up and out on the back of the top
of the housing.
4. Place both pouches inside the housing, then snap the housing
back together.
5. Place the housing back on the mounting tab.
13