Troubleshooting - Extel WESV 87053 Instrucciones De Uso E Instalación

8

TROUBLESHOOTING

With this video surveillance system, you have bought a high technology and ready to use
product.
All parts are supplied to use completely your kit.
Nevertheless if you encounter problems or dysfunctions, you can remedy these defects by
reading the following table:
CAUTION!
Respect the safety instructions at any moment!
Defect
No image and no sound
Blinking image
Perfect sound but image
too bright or too dark
Remote control unit does
not work
No night vision
If necessary, our technical website is at your disposal www.cfi-extel.com
Laatste versie van de te downloaden kleurenhandleiding op:
10GB
Cause
The camera and/or the
monitor are not powered
The cables are not properly
connected or are discon-
nected
Camera toward a too
strong light source
The light or contrast set-
tings have to be changed
The camera is directed to
a too strong light source
Depleted or improperly
inserted battery
No additional lighting
system installed
www.cfi-extel.com
CFI EXTEL WESV 87053 - 07/2009 - V1
Solution
Check all the installation
Power supply
Audio-video connection
Change the image am-
biance in the monitor
(P.P button of the remote
control unit)
Or change the position of
your elements
Check your settings
Change the positions of
your elements (cameras and
monitor)
Check the battery and its
position
Use an additional lighting
system