Manual Selection Of The Cameras; Settings; Maintenance - Extel WESV 87053 Instrucciones De Uso E Instalación

d. Commissioning
Connect the 12 VDC output of the adapter to the monitor output black plug.
Connect the mains adapter to a 230 V outlet.
To use your WESV 87053, it is recommended to use the remote control unit which inclu-
des more functions than the monitor.
Press the On/Off button "
e. Manual selection of the cameras
Use the "AV" key of the remote control unit to select a camera.
f. Settings
To access the different settings press the "MENU" key of the remote control unit.
Use the + and – keys to modify the parameters.
The settings disappear after a few seconds of inactivity.
If necessary, you can change the following settings:
"BRIGHT": the brightness of the image, if the image is too bright or too dark, set the
brightness.
"COLOR": colour adjustment.
"CONTRAST" the contrast of the image, an image too contrasted can be harmful for the
sight and mark the screen.
"TINT": colour balance, only used with standard NTSC.
For setting the volume, use directly the
the monitor.
7

MAINTENANCE

The warranty is void if elements are dismantled. Clean the outside only with a soft and dry
cloth. Before cleaning, disconnect and turn off the video surveillance system.
CAUTION
".
&
Do not use any acid or alcohol based or other similar cleaning
product or solvent. You may damage the appliance and the va-
pours are explosive and dangerous for health.
Do not use any tool which can be voltage conductor (metallic
brush, sharp tool...or other) for cleaning.
CFI EXTEL WESV 87053 - 07/2009 - V1
keys on the remote control unit and
9GB