Intended Use; Safety Instructions; Mounting Instructions - DURAVIT Vero Air Instrucciones De Montaje

Intended use

The mounting instructions come as part of the Duravit
bathtub and must be read carefully prior to installation.
Target readership and qualifications
The bathtub must only be installed by trained plumbing
engineers.
Explanation of the key words and symbols
Is used to address practices not related
NOTE
to physical injury.
Link to the mounting instructions in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Do not kink the hose
> Action required

Safety instructions

Product and/or property damage
Careless handling can result in damage to the surface of
lacquered bathtubs.
> Protect the bathtub from knocks and scratches during
installation and transport.
The breach of local and country-specific regulations
and standards can cause damage to the product and/or
property damage.
> Observe the local installation regulations and any
country-specific standards at all times.

Mounting instructions

Please read the pre-installation information sheets prior
to the installation. These are available to download on the
Internet at www.pro.duravit.com.
5
Avoiding damage
NOTE
Suction lifters can cause damage to the surface of
lacquered bathtubs.
> Attach suction lifters to the inside of lacquered
bathtubs.
6
Tipping the bathtub
> When tipping the bathtub ensure that the edge is
not damaged.
> Insert cardboard and protective film underneath to
protect the bathtub.
7
Mounting the cable-driven waste and overflow
The connecting hose #790166 is recommended for
mounting a bath spout with a waste and overflow set
or base inlet.
5
57312_BA_M_Acrylic_FST/19.05.3