Intended Use; General Information; Tools And Materials - Dometic DMBU09BAM Manual De Operación

Intended Use

encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
2 Intended Use
The microwave oven, hereinafter referred to as
"microwave," is designed for use in RVs to defrost, cook,
and heat food for short periods of up to 60 minutes. This
microwave is only suitable for the intended purpose and
application in accordance with these instructions. It is
not designed for industrial or laboratory use.
This manual provides information that is necessary for
proper installation and operation of the microwave. Poor
installation and/or improper operating or maintenance
will result in unsatisfactory performance and a possible
failure. The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including excess
voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in this
manual
Dometic reserves the right to change product
appearance and product specifications.
4

3 General Information

This section provides general information about the
microwave, its controls and components, and how to
select microwave-safe cookware.
I The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).

3 .1 Tools and Materials

Dometic recommends that the following tools and
materials be used while installing the appliance.
Included Parts
Microwave
Screws
Recommended Tools
Drill
Tapered 11/64 in. Drill Bit
Microwave Oven
Quantity
1
4
#2 Philips Screwdriver/Non-
marring Driver Bit
EN