Arcan XL 325 R Manual Del Usuario página 5

MAIntenAnce
When adding or replacing hydraulic fluid, always use a
quality hydraulic fluid. DO NOT use brake fluid, alcohol,
detergent motor oil, dirty oil or any fluid other than quality
hydraulic fluid. Improper fluids can cause internal damage
to the jack and improper or unsafe operation.
Adding Hydraulic Fluid
See Setup Instructions #3b.
luBricatiOn
All moving joints require lubrication often. Lightly grease
saddle post and saddle bottom. Remove handle and
grease the lower end of handle where it rotates in the
handle socket. Using a grease gun, grease the lift arm pivot
shaft grease fitting until grease appears at the end of the
shaft. Oil all lift arm linkages, front wheels and rear casters.
specificatiOns:
Rated Load Capacity: 3-1/4 Tons
Min Height: 3-1/2"
Max Height: 21-3/8"
Overall Length: 27-1/2"
Overall Width: 14"
Low Height Reach 12-1/2"
Weight: 104 lbs
Stroke to Full Height: (with out load) 8
trOuBle sHOOting
prOBlem
1. Unit will not lift load.
2. Unit will not sustain load or feels "spongy" under load.
3. Unit will not lift to full height.
4. Unit will not lower completely.
5. Handle tends to raise up while the unit is under load.
6. Unit still does not operate.
XL-325R
Warranty nOtice
Limited Warranty
This unit is covered under a 1 year NON TRANSFERABLE
warranty when used as recommended. PowerStation, LLC
warrants this unit against any defective workmanship or
materials that may occur under normal proper use. A copy
of the original sales receipt is required for any warranty.
Only use accessories from PowerStation, LLC on this unit.
PowerStation, LLC does not provide any warranty for any
unauthorized accessories used with this unit. This limited
warranty is void if the product is misused, subjected to
careless handling, repaired, or modified by anyone other
than PowerStation, LLC.
Manufacturer makes no other warranties, including, but not
limited to express, implied or statutory warranties, including
without limitation, any implied warranty of merchantability
or implied warranty of fitness for a particular purpose.
Further, PowerStation, LLC shall not be liable for any
incidental, special or consequential damage claims incurred
by purchasers, users or others associated with this
product, including, but not limited to, lost profits, revenues,
anticipated sales, business opportunities, goodwill,
business interruption and any other injury or damage. Any
and all such warranties, other than the limited warranty
included, are hereby expressly disclaimed and excluded.
Note: Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Warranty infOrmatiOn
For assistance with the operation or the availability
of replacement parts, contact our Parts and Warranty
Department at 1-800-837-5994. Please have available a
copy of your receipt, the model number of the product, and
specific details regarding your question.
We want to know if you have any concerns with our
products. If so, please call toll-free for immediate
assistance.
Please do not call the store where you purchased this
product.
1-800-837-5994
Monday - Friday 9am to 5pm EST
PowerStation, LLC
P.O. Box 1203
Travelers Rest, SC 29690
ActIOn
Purge air from hydraulic system by following procedure
under OPERATING INSTRUCTIONS.
Purge air from hydraulic system as above.
Purge air from hydraulic system as above. Check to be sure
oil level is not too high or low.
Check oil level. Make sure not overfilled.
Pump the handle rapidly several times to push oil past ball
valves in power unit.
Contact Parts & Warranty Department listed above.
5
Made in China
rev. 11/05/13