STEP 9
Strapping Front Mower Tires to Wheel Pads
• Secure the front mower tires to the Wheel Pads using the Safety
Straps
. Secure the hook on the Safety Strap to the Wheel Pad Cross
10
Bar and insert the Support Rod into the loop on the Safety Strap by de-
taching the Support Rod and then sliding the Safety
Strap Loop through and reattaching the Support Rod.
• Tighten the Safety Straps over the top of the tires
to secure mower to Wheel Pads.
STEP 10
Adjusting the Crank Handle
• The optimal Crank Handle length is in the longer setting. Some
mowers have brush guards or larger hoods that interfere with
the longer Crank Handle. The Crank Handle can be adjusted by
removing the Nylock Nut and Carriage Bolt and re-attaching in
the shorter setting.
Nylock Nut
Carriage Bolt
STEP 11
Raising the Mower
• Raise the mower by rotating the Crank Handle clockwise.
• See Step 20 for raising the mower with drill attachment.
Do not attempt to lift more than 300 lbs.
The MoJack EZ must be used on a solid level surface.
The engine must be turned off and key removed.
The mower must be in neutral.
The parking brake must be off during this step.
The Safety Straps must be firmly tightened.
MoJack EZ Lift
Operating Instructions
(optional)
Safety Strap
Wheel Pad Cross Bar
Longer Setting – 8" Radius
Shorter Setting – 6" Radius
13
Support Rod