Risk Of Electric Shock - Silvercrest SKGE 2000 C3 Instrucciones De Uso

All repairs must be carried out by authorised specialist
■
companies or by the Customer Service department. Improper
repairs may put the user at risk. It will also invalidate any
warranty claims.
Repairs to the appliance during the warranty period may only
■
be carried out by a customer service department authorised by
the manufacturer. Otherwise, no warranty claims will be held
for any subsequent damages.
Defective components must always be replaced with original
■
replacement parts. Compliance with safety requirements can
only be guaranteed if original replacement parts are used.
Do not allow the power cable to come into contact with hot
■
appliance parts. NEVER use the appliance near naked flames,
a hotplate or a heated oven.
After use, allow the appliance to cool down completely before
■
cleaning it. Risk of burns!
Install the appliance as close as possible to an electrical power
■
socket. Ensure that the power plug is quickly reachable in case
of danger, and also that there is no danger of tripping over the
cable.
Provide a stable location for the appliance.
■

RISK OF ELECTRIC SHOCK!

The appliance should only be connected to correctly installed
►
and earthed mains power sockets. Ensure that the rating for
your local power supply corresponds with the details on the
rating plate of the appliance.
Arrange for customer service to repair or replace connecting
►
cables and/or appliances that are not functioning properly
or have been damaged.
Do not expose the appliance to rain, and never use it in a
►
humid or wet environment.
Ensure that the power cable never becomes wet or moist
►
during use.
SKGE 2000 C3
GB │ MT │ 43 ■