Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - KENT Razor E17 Instrucciones De Uso

INSTRUCTIONS FOR USE

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the customer with all
necessary information to use the machine properly in a safe
an autonomous way. It contains information about technical
data, operation, machine inactivity, maintenance, spare parts
and safety conditions.
Before carrying out any procedure on the machine, the
operators and qualified technicians must read this Manual
carefully. Contact an authorized KENT Service Center in case
of doubts concerning the interpretation of the instructions and
for any further information.

TARGET

This Manual is intended for operators and technicians
qualified to perform the machine maintenance.
The operators must not carry out operations reserved for
qualified technicians. KENT will not be answerable for
damages coming from the non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The Instructions for Use Manual must be kept near the
machine, inside an adequate case, away from liquids and
other substances that can cause damage to it.

IDENTIFICATION DATA

The machine serial number and model are shown on the label
and can be read from the outside (1, Fig. C).
The machine model year is shown after the Date Code on the
serial plate (A06 means January 2006).
This information is useful when requiring machine spare
parts. Use the following table to write down the machine
identification data for any further reference.
MACHINE model ...........................................................
MACHINE serial number ...............................................
2

OTHER REFERENCE MANUALS

– Spare Parts List, supplied with the machine.
– Service Manual (that can be consulted at KENT Service
Centers).

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures
must be carried out by qualified personnel or by KENT
Service Centers. Only original spare parts and accessories
must be used.
Call KENT for service or to order spare parts and
accessories, specifying the machine model and serial
number.

CHANGES AND IMPROVEMENTS

KENT constantly improves its products and reserves the right
to make changes and improvements at its discretion without
being obliged to apply such benefits to the machines
previously sold.
Any change and/or addition of accessory must be approved
and performed by KENT.
Razor E17 — 909 6311 000(1)2006-01