Machine Description; Operation Capabilities; Conventions; Description - KENT Razor E17 Instrucciones De Uso

MACHINE DESCRIPTION

OPERATION CAPABILITIES

This scrubber-dryer is used to clean (scrubbing and drying)
smooth and solid floors, in civil or industrial environment,
under safe operation conditions by a qualified operator.
The scrubber-dryer cannot be used for moquette and carpet
cleaning.

CONVENTIONS

Forward, backward, front, rear, right or left are intended
with reference to the operator's position, that is to say with the
hands on the handlebar (2, Fig. C).

DESCRIPTION

Control panel
(See Fig. B)
1. Control panel
2. Brush/pad switch
3. Vacuum switch
Exterior rear view
(See Fig. C)
1. Serial number plate/technical data
2. Handlebar
3. Handlebar inclination adjusting knob
4. Solution flow control lever
5a. Solution flow control lever ECO position (water
"economy" usage, for a washing autonomy of 70-80
minutes).
5b. Maximum solution flow
5. Recovery water tank cover
6. Rear support wheel for transport/parking
7. Central wheels on fixed axle
8. Brush/pad
9. Brush/pad cover
10. Squeegee
11. Squeegee fixing handwheels
12. Front squeegee blade
13. Rear squeegee blade
14. Squeegee blade fixing springs
15. Recovery water drain hose
16. Recovery water drain hose bracket
17. Solution drain valve
18. Squeegee lifting/lowering lever
19. Solution filter
20. Power supply cable
21. Squeegee vacuum hose
22. Transport/parking device
23a. Transport/parking device activated
23b. Transport/parking device deactivated
23. Transport/parking device positioning pin
24. Brush/pad support (activated)
25. Recovery water tank
26. Solution tank
Razor E17 — 909 6311 000(1)2006-01
INSTRUCTIONS FOR USE
Under-tank front view
(See Fig. I)
1. Recovery water tank cover (open)
2. Recovery water tank cover gasket
3. Brush/pad support (activated)
4. Recovery water tank
5. Solution tank
6. Vacuum grid with automatic shut-off float
7. Recovery water drain hole
8. vacuum system motor
9. Brush/pad motor
10. Cover with brush/pad-holder coupling pin
11. Machine speed adjusting screw
12. Brush
13. Pad-holder
14. Pad
15. Terminal board box
16. Screw
17. Compensation hole
18. Cover stand (applied)

TECHNICAL DATA

General
Cleaning width
Machine width (without squeegee)
Minimum machine length with adjustable
handlebar
Minimum machine height with adjustable
handlebar
Squeegee width
Machine weight (with brush)
Central (fixed axle) wheel diameter
Brush/pad diameter
Wheel pressure on the ground
Brush/pad pressure on the ground (with
full tank)
Performance
Vacuum system capacity
Sound pressure level
vacuum system motor power
Brush/pad motor power
System voltage
Clean water tank capacity
Recovery water tank capacity
Values
17.0 in (430 mm)
22.4 in (570 mm)
36.6 in (930 mm)
40.2/44.7 in
(1,020/1,135 mm)
28.3 in (720 mm)
148.5 lbs (67.5 Kg)
9.8 in (250 mm)
17.0 in (430 mm)
2
<0.5 N/mm
61.6 lbs (28 Kg)
Values
56.2 in H O (1,316
2
mm H O)
2
76 dB(A)
550 W 50Hz
550 W 60Hz
(for US)
1,100 W 50Hz
550 W 60Hz
(for US)
230 V
8 gal (31 liters)
7.9 gal (30 liters)
5