Using Your Steam Inhaler - Facial - Veridian Healthcare 11-525 Manual De Instrucciones

USING YOUR STEAM INHALER
FACIAL TREATMENTS
Steam facials help to open the pores in the skin and
coaxes out the dirt, oil, makeup residue and
impurities that have built up within the skin.
It is recommended that you seek the advice of a
licensed esthetician or cosmetology professional for
direction on the recommended frequency and
duration of steam facials.
Use of the Steam Inhaler for a facial requires the
same steps as when using this product for hot steam
inhalation therapy, utilizing the larger facial mask
rather than the small mask.
STEAM FACIAL TREATMENTS
1. Review steps 1-13 in the 'USING YOUR STEAM INHALER - HOT STEAM INHALATION
THERAPY' section of this manual for guidelines on the set-up and operation of the unit.
2. Place the large facial mask on the unit and proceed with your treatment.
3. Inhale and exhale normally. Continue treatment for as long as comfortable or until the
steam lessens and quits, approximately 6-9 minutes.
4. When treatment is complete, turn off unit immediately at the dial switch on the cord and
unplug the unit. Do not attempt to move or disassemble the unit until it has cooled
completely, approximately 10 minutes.
5. Disassemble and clean your steam inhaler. Be certain that all parts are dry before storage.
ENGLISH • 11