Operating Instruction - Comelit 41637 Instrucciones De Montaje Y Servicio

3. Operating Instruction

FRONT controls
1. Menu / Exit
This button is used to bring up or disappear the controls menu. Exits from the OSD system and the selected
function.
2. (Down) / (Brightness)
Moves down the menu lists in the OSD. Selected brightness.
3. (UP) / Vol.
Moves up the menu lists in the OSD. Selected volume.
4. (LEFT) / Source
Selected MENU decreases the value. While in the normal active (Not MENU DISPLAY) mode, this button is used to
bring up Sources select Menu (CVBS1, CVBS2, S-VIDEO, RGB, DVR, HDMI)
5. (Select) / (Freeze) / AUTO
This button to choose on the menu then pushes the button & Selected MENU increases the value: While in the
CVBS, S-Video mode, press this button to FREEZE (
image. While in the RGB mode, press this button to AUTO adjust the H/V POS, H/V SIZE, and phase.
6. PIP
Multi window activate or cancel the PIP function.
7. Power On/Off & LED
This button then turns the monitor ON and OFF.
LED – A green indicator lights when the power is ON and input signal.
A red indicator lights when the power is OFF. (the indicator blinks when the power is ON and Input NO
signal)
8. Sensor Window
Remote Control. Receives signal from the Remote controller
9. Speaker
) the picture for display. Press again to exit the FREEZE
17