Shutting Down - AEG RA 5587 NE Manual De Instrucciones

NOTE:
• The radiator will now warm up the room. The ther-
mometer symbol flashes throughout.
• When the desired temperature is reached, the ther-
mometer symbol stops flashing and is constantly lit.
• The thermometer symbol flashes again as soon as the
radiator needs to be heated up again.
• Use the " / " buttons to change the desired room
temperature at any time.
Program the Switch-Off Timer
(AUTO OFF)
Do you want to determine when the radiator should auto-
matically switch off?
1. Press the MODE button again as soon as you have set
the temperature. "AUTO OFF" flashes on the display.
2. Use the " / " buttons to set a time between 1 and
24 hours. The figure can be read off the display.
3. After around 10 seconds, the "AUTO OFF" display stops
flashing and is constantly lit. The radiator will switch off at
the desired time.
Program the Switch-On Timer (AUTO ON)
Do you want to determine when the radiator should auto-
matically switch on?
1. Press the MODE button twice after you have set the
temperature. "AUTO ON" flashes on the display.
2. Use the " / " buttons to set a time between 1 and
24 hours. The figure can be read off the display.
3. After around 10 seconds, the "AUTO ON" display stops
flashing and is constantly lit. The radiator will switch on at
the desired time.
NOTE:
The "AUTO OFF" and "AUTO ON" functions cannot be
combined.
Frost Guard Function
Are there rooms in your house which you would like to pro-
tect against frost? The radiator has a frost guard function.
1. Connect the radiator to a earthed socket.
2. Switch on the power switch. The power indicator lights
up, the display remains dark.
3. If the temperature falls to below 5 °C, the radiator
switches on at setting 3. The display lights up.
4. As soon as the room has been warmed, the radiator
switches back to Standby. The display switches off.

Shutting Down

1. Press the button until the display switches off.
2. Switch the power switch to "0". The power indicator
switches off.
3. Disconnect the plug from the mains.
Storage
WARNING:
Since the housing and metal parts become hot during op-
eration, allow the appliance to cool before you put it away.
• Clean the appliance as described and allow it to dry
completely. We recommend that you keep the appliance
in the original packaging if you do not want to use it for
long periods.
• Use the handle to pull the appliance. Do not pull on the
cable!
• Always keep the appliance out of the reach of children in
a well-ventilated and dry place.
Cord Wind-up Station for Power Cord
The power cord can be wound up on the front of the appli-
ance.
Cleaning
WARNING:
• Always disconnect from the mains before cleaning and
wait until the appliance has cooled down.
• Never immerse the appliance in water to clean it. This
may lead to electrical shock or fire.
CAUTION:
• Do not use wire brushes or other abrasive materials.
• Do not use caustic or scouring agents.
• Wipe away dust with a dry cloth.
• Flecks can be removed with a suitably damp cloth.
Troubleshooting
Problem Possible Cause
The appliance The appliance has
does not work. no power supply.
The appliance is
faulty.
English
39
Remedy
Check the plug socket
with another appliance.
Connect the mains
plug correctly.
Check the main circuit
breaker.
Contact our service
centre or a specialist.