Managing Messages; Recording Sensitivity - Olympia MEMO 99II Manual De Instrucciones

Managing messages

The device has 4 files (named A, B, C and D) in which to store the messages.
You can store a total of 396 messages or 540 hours in LP mode using all the
files (refer to Page 30 Recording quality"). A max. of 99 messages can be re-
corded in one file. Proceed as follows to select a file:
Press the FILE/REPEAT button to
select the required file/memory lo-
cation (A, B, C, D). The number in
the top right corner of the display
indicates the total number of mes-
sages recorded in the respective
file. The time at the bottom of the
display indicates the total recor-
ding time of the message selected.
Note: When a message is recorded, the device automatically generates a
consecutive number for it, starting with 1. When no more memory space is
available, FULL'' appears in the display. Refer to Page 37 to learn how to
erase messages.

Recording sensitivity

To set the recording sensitivity,
press and hold the MODE button
until SET" appears in the display.
Press the UP or DOWN button un-
til MIC:LO/HI appears in the dis-
play. Press the FORWARD or
BACK button to set the function to
LO to record sounds the sources of which are near the microphone. Press the
FORWARD or BACK button to set the function to HI if you want to record
sounds which are further away. Confirm the setting by pressing the PLAY/
STOP button.
12
Operation
A
B
C
D
GB
31