Cleaning The Blades - O'Barber TO30 Manual De Usuario

EN
 Clean the blades with an antibacterial spray. We recommend STERIL
CLEANER 920- or 921- disinfectant, lubricant and cooling products.
 Lubricate the blades at least once a day (see § 3.5).

4.2 Cleaning the blades

In the case of regular use, clean the blades at least once a day.
 Remove the blades as described in § 3.5.
 Clean the inside of the blades with the brush supplied (Fig. 7).
 With your thumb, press on the 2 lugs (arrows) to move the fixed/mobile
blades (Fig. 7). Eliminate all cutting debris and residues stuck between
the blades.
 Lubricate the blades and put back on the clippers as described in § 3.5.
26