Perel 406 Manual Del Usuario página 5

6. Put the protective cover back to the base and lock the cover with the screw.
7. Put the front housing back to the base and lock the front housing with screw.
8. Install 2 x AA-size batteries into the battery compartment.
9. Press the RESET key once and make sure it is working on initial condition.
3. Description
RESET
☼
+
-
4. Operation
Setting the clock
After battery installation (2 x AA size) or pressing RESET or the
thermostat will enter the time adjustment mode. The hour is flashing. Set the hour
with + or -. Press
the minutes. Press
adjust day. Press
running mode.
Viewing the programs
The thermostat is a weekly programmable thermostat, 7 days with 24 hours can
be set. Each hour can select ☼ (comfort temperature or CT) or
temperature or ET) temperature. A weekly factory preset program is installed. This
preset program is set for most families.
Heating and Climate Programming
Press the key. The Monday preset program at 0:00 is being displayed. Press +
or -. The display will show the temperature setting for each hour, e.g. Monday ET
program is set at 0:00 - 5:59 and 8:00 - 15:59, CT program is set at 6:00 - 7:59
and 16:00 - 22:59. Note that the ET is set at 23:00 - 0:00.
Press the key to display the next day preset program. Press + or -. This will
show the temperature setting for each hour. Repeat the above steps, each preset
20.01.2015
Program setup
Temperature reading
Clock setup
Reset button
Power ON / OFF button
Vacation temperature setup
Enter button
Day temperature
Night temperature
Higher temperature
Lower temperature
to confirm. The minutes are flashing. Press + or - to adjust
to confirm the setting. The day is flashing. Press + or - to
key to confirm the setting. The display will return into
406
key, the
(evening
©Velleman nv