4. Features
• full remote control for adjustment of: brightness, colour, contrast
• 2 video inputs (one with audio)
• OSD (On-Screen Display)
• PAL/NTSC system
• image can be switched left/right and up/down
• comes with: remote control, cable, table stand, headrest installation frame
5. Description
Refer to the illustrations on page 2 of this manual.
front panel
1
"+" button
2
menu button
3
"-" button
4
power button
5
remote control sensor
6
headphones connection
remote control
a
ON/OFF button
b
brightness adjustment
c
colour adjustment
g
system button
6. Wiring
•
Connect the supplied cable with the monitor's mini-DIN plug.
•
yellow RCA = video 1
•
red RCA = video 2
•
white RCA = audio (only for video 1 channel)
•
black = power (pin = + ; ring = -)
7. Operation
Refer to the illustrations on page 2 of this manual.
•
Make sure the video and audio input connections are properly executed (see "6. Wiring").
•
Press 'MENU' [2] to display the adjustments in this order: Brightness → Colour → Contrast →
LEFT/RIGHT → UP/DOWN → exit menu. Enter the values with '∧' [1] and '∨' [3].
•
The power button [4] activates/deactivates the LCD monitor. It is not necessary to disconnect
the power adapter.
•
The speaker is switched off when headphones are connected.
24.11.2009
MONCOLHA5PN6
to increase the entered values
to select the various adjustments
to reduce the entered values
to activate/deactivate the device
sys1 provides normal viewing for video1 and 2
sys2 provides normal viewing for video1 and mirrored viewing for video2.
d contrast adjustment
e volume up/down
f Video1/2 channel selection button
4
©Velleman nv