Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell MAF02100/a Manual De Instrucciones

2.3 Technical data

Nominal voltage
Saw blade speed while idling
Cutting depth 0º/45º
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight with rechargeable battery, without parallel stop
Dimensions incl. guide assembly (W x L x H)
as cross-cutting system
Cutting depth 0°/45°
Cutting length at 12/40 mm workpiece thickness
Weight with rechargeable battery and guide assembly

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Cross-cutting system KSS40 18 M bl complete with:
1 carbide-tipped circular saw blade Ø 120 mm (4 ¾ in.), 24 teeth
1 riving knife/splitter (thickness 1.2 mm / 3/64 in.)
1 hose connector
1 parallel stop
1 service tool in bracket on the machine
1 carrying case Max
1 operating manual
1 folder "Safety Instructions"
2 clamping claws for Item No. 919801, 919821
1 FLEXI rail FX 140 for cutting length max. 140 cm (55 in.) for Item No. 919801, 919821
1 charger APS 18 M for Item No. 919801, 919821
2 rechargeable batteries 18 M 94 for Item No. 919801, 919821
1 chip bags
Sound power level
103 dB (A)
.
2
18 V
6700
rpm
42/29 mm (1 21/32, 1 9/64 in.)
0 – 45º
122/112 mm (4 51/64, 4 13/32 in.)
1.2 mm (3/64 in.)
1.8 mm (0.070 in.)
20 mm
28 mm (1 7/64 in.)
2.8 kg (6.2 lbs)
200 x 580 x 200 mm (7 7/8 x 21 21/32 x 7 7/8
in.)
40/27 mm (1 9/16, 1 1/16 in.)
337/292 mm (13 ¼, 11 ½ in.)
3.6 kg (7.9 lbs)
Workplace-related emission value
92 dB (A)
-19-