Technical Data; Emissions - Mafell NFU 50 Manual De Instrucciones Original

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Power input (nominal load)
Current at nominal load
Tool speed while idling
Tool speed at normal load
Milling depth 0°
Tilting milling unit
Tool diameter
Basic tool body thickness
Tool milling width
Tool mounting hole
Hose connector diameter
Weight
Dimensions (W x L x H)
as cross-cut milling system
Milling depth 0°
Milling length
Weight with guiding device
Dimensions incl. guiding device (W x L x H)

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841-1 and EN 62841-2-5:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the tool included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
230 V~, 50 Hz
2300 W
10.8 A
5900 rpm
4500 rpm
50 mm (1 31/32 in)
0° – 45°
163 mm (6 27/64 in)
58,1 mm (2 9/32 in)
60.5 mm (2 3/8 in)
30 mm (1 3/16 in)
58 mm (2 9/32 in)
7.7 kg (16 63/64 lbs)
340 x 420 x 280 mm (13 25/64 x 16 17/32
x 11 1/32 in.)
44 mm (1 47/64)
370 mm (14 9/16)
9.4 kg (20 47/64 lbs)
370 x 810 x 280 mm (14 37/64 x 31 57/64
x 11 1/32 in.)
L = 87,8 dB (A)
PA
K = 1.5 dB (A)
PA
L = 98,8 dB (A)
WA
K = 1.5 dB (A)
WA
.
2
-21-