Mx Onda MX-HC2193 Manual De Instrucciones página 31

Selector heating rods
This switch activates or deactivates the upper and lower heating rods, has 4
positions which are indicated in the following table with the function they
perform:
POSITION
1
2
3
4
Operating mode
With this switch you can select the operating mode (with or without convection
system) and with or without interior lighting. Refer to the following table:
POSITION
1
2
3
4
Timer
Turning the timer control in the clockwise
direction, the oven will operate, the operation
indicator lights up and the will activate and start
the countdown from the set time. After the time
an audible indication and switch off the oven.
SYMBOL
Only the lower heating rods are on - heat at the
The upper and lower heating rods are on - heat
SYMBOL
OFF
Operation of the oven in the convection mode
FUNCTION PERFORMING THE OVEN
All heating rods are off
Only the upper heating rods are on - heat at
at the top and bottom
OPERATING MODE
Operation of the oven in the conventional
mode without interior lighting
without interior lighting
Operation of the oven in the conventional
mode and interior lighting
Operation of the oven in the convection
mode and interior lighting
7
bottom
the top