iSi Soda Siphon Stainless Steel Modo De Empleo página 16

chargers or charger from different manu-
facturers than stated in the Whipper Data.
——— When screwing on the charger, do so away
from others and keep face away from the
siphon; do not bend over the siphon!
——— The siphon is a pressurized bottle. If it
is dropped or damaged (e.g., cracked or
dented), it should not be used again
because it poses a risk of injury. Please
have the siphon checked by the iSi
service center!
——— Never unscrew the head when the siphon
is pressurized!
——— Never use the lever as a carrying handle!
——— Only dismantle the iSi Siphon for cleaning
in accordance with the illustration!
——— Only clean by hand using lukewarm water
and domestic hand dishwashing detergent.
The iSi Siphon is not dishwasher safe!
Cleaning the head of the siphon in the
dish washer may damage the plastic head
and the charger holder, which ultimately
puts your safety when using your iSi Siphon
at risk!
——— Do not make any modifications to the iSi
Siphon. This will void the warranty and
exempt the company from any liability!
——— Never use more chargers than specified
and never overfill the siphon. This will
ensure that the specified maximum oper-
ating pressure is not exceeded!
——— If the pressure will not release, please
contact iSi or your service center!
NOTE: Before using the iSi Siphon for the first
time, carry out thorough cleaning as shown in
the Cleaning illustration.
Siphon Instructions.
NOTE: Please observe the illustrations in the
siphon instructions!
If the water is cold when poured in and the
siphon is kept in a cool place, then the soda
water will be particularly fizzy. Keep filled
soda siphon in the refrigerator.
8