Joint Function; Scope Of Delivery; Load Capacity; Tools For Assembling The System Joint - FIOR & GENTZ NEURO CLASSIC H2O Instrucciones De Uso

4.

Joint Function

The NEURO CLASSIC H
motion control. It is preassembled in a physiological joint angle of 5°.
The system joint also has an integrated posterior offset (fig. 1).
System Width
Posterior Offset of the Joint Axis
5.

Scope of Delivery

Description
system knee joint (without figure)
set 2-component adhesive with primer (fig. 2)
assembly/lamination dummy (fig. 3)
6.

Load Capacity

The load capacity results from the relevant patient data and can be determined by using the Orthosis Config-
urator. Use the system components determined by the Orthosis Configurator when producing an orthosis and
mind the recommended production technique.
7.

Tools for Assembling the System Joint

Tools
T8 hexalobular screwdriver/bit
T20 hexalobular screwdriver/bit
torque screwdriver 1–6Nm
sliding washer centring pin
18
O is a free moving, monocentric system knee joint to provide
2
20mm
20mm
Quantity
1
1
1
fig. 2
System Width
20mm
x
x
x
x
fig. 1
fig. 3